Shakey V2

3 posts / 0 new
Last post
stedy1
stedy1's picture
Shakey V2

Just finished rewiring my 2nd V2 with great success. The only thing now is when I run certain IR commands like "Goal" he falls over!! Several commands have him falling over forward. Is there a limit switch type adjustment too keep him from going so far?

Stedy1

stedy1
stedy1's picture

Figured it out! It was the foot saddle that attaches to the side of the foot. It was hanging up in the back of the 2 sections of the foot casings and causing the V2 not to come back to center of gravity. This condition had occurred due to shipping damage and I was able to plane down the culprit edge and correct it. Sorry for the errant post
Stedy1

idrum289
idrum289's picture

No apologies neccessary mate. Glad you fixed it.