have i posted the id corretly
have i posted the vid corretly
no i gess ,cant see it.post first on youtube then here.
have a look
well done mate,good video.it seems to be the springs.they look different.
is it possible that they are different lengt or thikness.
sound coming from the spring.
Thanks, the right side seems shorter and is more stiffer. One of the problems is the that if you pull it to the right the spring doesn't pull his body straight. It leans..
Anyways, besides that he goes immediately to the right when tapping the left buttons and I don't think that's the spring. I could be wrong of course..
It's the same thickness but different stiffness..maybe a software problem
lets do the basic first
can you remove the springs and put them side by side .
looks to me the sound coming from the springs.
incase its the springs.i have a pair you can have.
Maybe I should change the springs around.. is there a way to switch him on when his stripped.
i dont know that.but try to do one thing at the time.try to listen if the sound really comming from the springs.
Thanks, that would be great. I'm in SA though... yeah, you right one thing at a time. I just really want him to work.. what I do know is that he can rock side to side but only when he boots up..in control mode he can't.. initially I wanted to reset or somehow reload the software as I didn't know what the previous owner did..but let's leave that.. ill check the springs again..thanks again
Diffenitely the springs
In SA unfortunately they only sell Robos v1 which I do have but I love the RS media...does the guys on the forum buy and sell parts, robots etc..
i have spare springs.you can give me your adres and name in pm.
i send you a pair free.
hi,unraffel this wire ,make it desame as right side,nice next to the iron cable,
not arround it.
Saw that lastnight, ive done that.. do you think i should desame legs too or wait..
if there's no problem whit the legs ,then dont change it.
can you post pic of the right side on top circuitboard.
some rsm has build in ribbon wire for internet.
looking at what youve seen so far do you think its a hardware problem i.e springs or possible a software..
thats awesome, ill check that when i get home. Just very paranoid, my mind is working overtime with this issue..
i know the feeling.seeya when you get home.
Will post a pic soon of circutboard for internet
Right side of the circuitboard
does he have firmwire 2 ?
Hey there, im not sure which firmware he has... i was trying the other day to search for other firmware (V2) I believe.. it surpose to or can help take out any bugs or default errors the robot might have. i also read another thread on here something that its risky to flash the firmware, although having flash previous firmware on other electronics was no problem.
this is the link ive been reading...
hi.i never try it.so i dont know .i send the springs yesterday.
and yes some have try it and fail