RS media waist problem

98 posts / 0 new
Last post
nomad
nomad's picture

and thank you and helibot for making this great post.

LBMebia
LBMebia's picture

Ahhhh, just people helping people in the end..

nomad
nomad's picture

yeach

LBMebia
LBMebia's picture

Adaptors.. i read a couple of post but its kind of in the air.. What to use, what not to use and moddified power supplies.. Can i use any adaptor with the right voltages i.e 7.5 3ma

LBMebia
LBMebia's picture

3100MA at 7.5v

Helibot
Helibot's picture

Hey LBMebia, Awesome news!!. Its great he is all going. The strips are sensors, but they shouldn't need any grease, but extra grease shouldn't do any harm.
Any DC power supply from About 7 to 8 volts will work fine, but it must be able to supply 3amps or more to allow him to move correctly. Less than 3 amps may work but he may reset when moving many limbs at once.

LBMebia
LBMebia's picture

Ok great.. So between 7-8v and 3amps plus... How much more than 3amps..
Also, as i understand the main reason for the adaptor is for, if you are using the USB cable to PC, plug the AC adpator in to prevent the batteries from dieing..

Pages