RSM v1 to v2 problem

52 posts / 0 new
Last post
janige
janige's picture
RSM v1 to v2 problem

Hy all!
tuday I got  serial usb and i try  upgrade v1 to v2.....

when i connect to my rsmedia to pc ---> look the picture.

https://www.dropbox.com/s/htdswxzireqw6kz/rsm.JPG

and when I connect to pc   "unknown device"
what i need to do??
why not working?
maybe hardware problem?

 

nomad
nomad's picture
nomad
nomad's picture

this wil help.i mean instant link

nomad
nomad's picture

http://www.themadrobot.talktalk.net/page_help.html

here you will find your answer,i gess

janige
janige's picture
nomad
nomad's picture

you did find what you are looking for?

janige
janige's picture

no :'( I dont know why not working usb mode in bootloader. "unknown device" i think maybe mainbord is bad.....
and I have a new problem....when I very angry i hit the keyboard, and I push 2-3-4 button in bootloader....the robot cant load....
If i send you the mainboard you can repair??

nomad
nomad's picture

NO SORRY I CANT REPAIR BOARDS,YOU HAVE A MEMMORY CARD IN FROM 1GB IN RSM,?

janige
janige's picture

ok.
yes i have but i try without memory card and with memory card.
unknown device again :@
made in china=poor quality

nomad
nomad's picture

oh thats a problem maybe for unknow device.
put sd caed in rsm and boot,let him do complezte introdution,then see if you can see it on your pc

janige
janige's picture

rs cant boot. but i can use the memory card before the robot went wrong.

nomad
nomad's picture
janige
janige's picture

:) I rty, not working.

nomad
nomad's picture

try different sd cards,not all working good on a rsm.

janige
janige's picture

I try different 2Gb sd card, not working.

nomad
nomad's picture

2 gb dont work only 1 gb

janige
janige's picture

:( only 2 card have 1 and 2 Gb. I think the problem is other.Because when I connect my RS media to pc in bootloader Press 0
I got this massage
"Initialize USB drive.
USB drive ready for transfer."
Connect my pc and show "unknown device"
Have you got an idea?
i try win7,xp, wmv xp not working.

nomad
nomad's picture

use 1 gb only.i think it says unknow device Always cause there no driver for it.
what is it that you try to do,

janige
janige's picture

ahan! i think what is the problem! my problem is my computer's mainboard, maybe not supported RSM... and i have a Laptop, everythink is working.

nomad
nomad's picture

whits program you try to use.

ps rsm need Always rechargebles batteries in + adaptor for wallsoket same time.
SO FILES DONT GET CORUPT

janige
janige's picture

hyperterminal console only.

nomad
nomad's picture

all the time whit avery thing you do

janige
janige's picture

thanks for your help

nomad
nomad's picture

my knowledge is very limited,but i can help a little.
adaptor for rsm is 7.4 volt

janige
janige's picture

I know witch adapter is good. 7,5V 3,1A
i have adapter 7.0v and 3,5A woking good.
when you connert ac dc adapter in robot leg then your robots legs are moving?

nomad
nomad's picture

yes thats a good one.not moving safety that he dont pull the adaptor from the wallsocket

janige
janige's picture

ok I understand.

janige
janige's picture

i have a new problem :)))
i have a bluetooth module, i read this page and many more. http://www.robocommunity.com/forum/thread/17709/Networking-over-serial-w...
when I connect my rsm to pc i cant see anything in rs terminal console,and telnet.
I must see " # "
I try with usb serial com X again i cant see anything
I hope you understand what i write here :) (sorry i from Hungary)

nomad
nomad's picture

whits program are you trying to use ?

janige
janige's picture

i want use rsmedia by/with web, mobil and RS Media control staion(pc).

nomad
nomad's picture

okay,did you store any of that on you c:
if yiu did see for properties,see if its not blocked there,
if it is just unblok it then there.
can you download Skype its better then we can use pic to send,much better way

Pages