Robosapien RS Media

2 posts / 0 new
Last post
Antweewow
Antweewow's picture
Robosapien RS Media

Hi Folks,

I'm new to this forum so please be kind ;-)

I recently purchased a used RS media robosapien (3 days ago), I bought brand new batteries for the Controller and for the Robo RS. All powers up as I expected, arms, waist head, eyes everything is working EXCEPT he does not appear to be able to walk. When I press L on the controller he says he is just going to have a look over there, but their is no movement in his legs. However when I ran the D dance demo, he did appear to move his legs slightly so he moved to the side?

Is there anything I am doing wrong. Also there is a low level pulse sound comming from either the woofer or one of the speakers.

Hope you can give me some advice.

Thanks Ant

Antweewow
Antweewow's picture

Hi All,

Before I read this thread, I removed the back panel exposing the mass of wiring and the PCB board. Looked like there was a connector half on/half off. Switched it on and hey presto works a treat. Must have come loose during transit.

Thank

Ant